X45- CO2 Laser Power Supply For Embroidery Machine-manufacture,factory,supplier from China

Development of CO2 laser power supplyCO2 laser power supply accompanied with the development of CO2 laser, the initial application in the 1970s, and later with the progress of technology, the application field continues to expand.

Carbon dioxide laser is a gas laser with CO2 gas as the main working substance (CO2: N2: He=1:7:20). The CO2 laser consists of a discharge tube, a resonator and an electrode. With the addition of a DC high voltage pump, the gas in the discharge tube emits light (the output wavelength is 10.6μm).

How to repair the failure of CO2 laser power supply?CO2 laser is widely used in laser engraving, laser cutting and other fields, mainly composed of luminescence system, motion system, control system. Next, our company will briefly introduce how to judge and troubleshoot the failure of CO2 laser power supply from the following two aspects.Laser has no laser output1. Check whether the laser tube itself is illuminated (test whether it is illuminated at the optical outlet of the laser tube). If it is illuminated normally, check whether the lens is damaged and the optical path is offset.2.

Various techniques for switching power supplies to reduce lossesThe efficiency of PWM switching power supply without special loss control technology is lower than that of switching power supply with loss control technology. For switching power supplies that have no problem with heat dissipation, such as some off-line power supplies, the efficiency may be satisfactory. But for portable power supplies and devices requiring small size, greater efficiency must be sought.

Power supply precautions and fault detection methods of laser cutting machineLaser cutting machine power use precautionsLaser cutting machine in the process of use, to the various components of the equipment for good maintenance, to ensure the normal operation of the machine. Laser power supply is one of the most important parts in laser cutting machine equipment, improper use is easy to cause damage to the power supply, affect the normal production.

As early as 1983, a scientific paper posted by way of two scholars, Anderson and Parrish, proposed "selective photothermal decomposition". This is a very necessary thought for the improvement and software of laser in dermatology.

Optical terms for cosmetic instrumentsA photon is an elementary particle, a quantum of electromagnetic radiation. In quantum field theory, it's the force carrier that transmits the electromagnetic force.Light spots/spots are few and far betweenLight spot is the contact point of light contact skin, different instruments have different light output size and shape. Such as color light instrument contact point is generally rectangular, size marked as long x wide (for example: 10mm x 25mm). Generally, the laser output is a dot, and the size is marked as the diameter (e.g., 3mm, 8mm, etc.).

A photon is an fundamental particle, a quantum of electromagnetic radiation. In quantum subject theory, it is the pressure provider that transmits the electromagnetic force.Light spots/spots are few and a ways betweenLight spot is the contact factor of mild contact skin, distinctive units have specific mild output measurement and shape.

Selective photothermal decomposition(Selective Photothermolysis)As early as 1983, a scientific paper published by two scholars, Anderson and Parrish, proposed "selective photothermal decomposition". This is a very important concept for the development and application of laser in dermatology.

Precautions for using laser and colored light◇ In the course of optical treatment, the operator should minimize the potential risks to the person present and the possible side effects to the customer◇ During the course of treatment, unauthorized persons are forbidden to enterAll reflective materials and inflammable materials should not be placed in the treatment room, such as mirrors and reflective glass objectsCarbon dioxide extinguisher should be placed in the room◇ Beauty care center should keep the fire outlet unblockedDoors should be kept closed and Windows should be covered with light -